AiM MXG 1.2 Strada Race Icons Dash Display
AiM MXG 1.2 Strada Race Icons Dash Display
AiM MXG 1.2 Strada Race Icons Dash Display
AiM MXG 1.2 Strada Race Icons Dash Display

AiM MXG 1.2 Strada Race Icons Dash Display

Regular price
Sold out
Sale price
Quantity must be 1 or more

AiM 7" MXG 1.2 Strada Display with Standard Icons

  Display: 7' Display

  • Resolution: 800x480 pixels
  • Brightness: 1000:1
  • Ambient light sensor: Yes
  • Alarm LEDs: 8 configurable RGB LEDs
  • Shift lights: 10 configurable RGB LEDs
  • CAN connections: 2
  • ECU connections: CAN, RS232 or K-Line
  • ECU compatibility: +1000 industry leading ECUs
  • Expansion CAN connection: GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
  • Analog inputs: 8 fully configurable, max 1000 Hz each
  • Digital inputs: 1 speed input, coil RPM input
  • Digital outputs: 1 (1Amax)
  • Second CAN: Yes
  • Body: Anodised Aluminium
  • Pushbuttons: Metallic
  • Connectors: 2 AMP connectors + 1 Binder connector
  • Power consumption: 400 mA
  • Dimensions: 237x127.6x26mm
  • Weight: 950g
  • Waterproof: IP65

The MXG Strada Dash features a 7" wide colour TFT display with great visual impact.

Key Features:

  • 7" TFT display
  • 1000 + ECU connections
  • Ambient Light Sensor
  • 10 multi-coloured RGB shift lights
  • 8 analogue inputs
  • 6 digital inputs
  • Second CAN
  • Two digital outputs
  • Configurable pages
  • Free race studio 3 download

Aim MXG Strada with Standard Icons

The AiM MXG 1.2 Strada Dash is a 7" colour display which offers a great visual impact. It is configurable to show all the information coming from the Engine Control Unit (ECU), analogue  / digital inputs, pre-defined math channels and the optional GPS Module.

Connecting the MXG 1.2 Strada Dash to your ECU (road or race) is very simple. You can sample and display dozens of channels straight from your vehicles ECU. This is often the quickest and easiest setup, needing only two cable connections to the ECU instead of multiple connections to analogue sensors.

The sampled data depends on the actual ECU but typically RPM, throttle position (TPS), oil / air / water temperature, oil pressure, battery voltage, speed, gear, lambda value (air / fuel ratio). The list of ECU drivers is over 1000+ and is constantly being updated and upgraded.

Pre-Configured Pages

The MXG Strada shows together with RPM scale, all the data you need such as speed, water temperature and oil pressure, lap times and much more. You can choose the custom pages you want, including up to four additional fields. We have a large library of page styles, defining which data to be shown and their end of scale and measure units, also swapping between pages is easy using the push buttons.


Flexible Shift Lights & Alarms


The MXG has 10 multi-coloured RGB shift lights can be customised to how you like them. Defining the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs. You can configure them in order to turn them on/off depending on analogue or digital inputs.ECU values, expansion values, math channels or optionally a GPS08.

You choose the conditions and colours, you can select a solid alarm or a flashing one, also the flashing frequency. It is also possible to configure an accompanying text message on the display and set the alarm priorities.

High Contrast TFT Display

The MXG Strada has a 7" high contrast TFT display. It's visual quality is optimised by it's ambient light sensor which keeps the backlight at the best brightness levels, avoiding the screen from dazzling you when it gets dark, yet keeping it bright and visual during the day.